Hopkins Tailight Converter Kit Installation - 2000 Lexus RX 300- Video
Today on our 2000 Lexus RX300, we'll be installing the Hopkins Tail Light Converter with Install Kit, part number 46255. When not using your four flat, you can store it in your spare tire compartment and when you do want to use your four flat, you'll life it out and you'll set it out the rear of the vehicle, making sure you keep it clear of the center latch on the rear hatch. The weather stripping will be pushed in, allowing the wire to come out the rear of the hatch, yet not damage it. To begin with, we need to raise the rear hatch. We'll also need to remove the carpet cover that covers up the spare tire lid as well as any other covers that might be in the way here. In this case, the hard cover we we're able to just use the hook and hold it up out of place. We'll first remove the threshold here. To do this, we'll use our trim panel tool to remove 4 black push pins and then we'll pop out the fasteners that hold it in place. With the center threshold removed, now we can go ahead and begin on taking out our other parts. We'll begin here on the driver's side. more
12/6/2014 3:51:17 AM
Trailer Wiring Harness Installation - 2000 Lexus RX 300- Video
Today on our 2000 Lexus RX300, we'll be installing the Tow Ready 4-Pole Wiring Harness with Hardware kit, part number 119179KIT. To begin our install, we'll first open up the rear hatch. We'll need to remove the taillight assemblies on each side. To remove the taillight assembly, we'll remove the fastener caps and then remove the fasteners. Once we remove the fasteners, we can go ahead and remove the taillight assembly, carefully pop it out of its position, not breaking the alignment tabs underneath. We'll just let the light hang there here on the driver's side and move over to the passenger's side repeating the same process. With our taillight assemblies out, we can now gain access to the manufacturer's wiring here behind the taillight assembly. more
11/26/2014 3:49:47 AM
Trailer Wiring Harness Installation - 2012 Lexus RX 350 C57674- Video
Today on this 2012 Lexus RX350, we're going to install part number C57674. This is the adapter 4-pole to 7-pole and 2-pole with test lamps. The first thing we're going to do is take the bracket that comes with the 7-pole connector and attach it to the panel on the bottom here. There's not much really to bolt to, so we're going to run some holes through the plastic and use some fender washers on the inside to help secure it. We'll just go ahead and line it up with the existing form of the plastic, and we'll go ahead and drill a couple of hole. We'll be using a 3/16" drill bit. We're going to need to get behind our panel as well, so we'll go ahead and loosen all the fasteners across the front and one on the side here to give us some working room. There's also one plastic rivet that we have to remove. more
11/10/2014 11:35:28 AM
Trailer Wiring Harness Installation - 2007 Lexus RX 350- Video
Today on this 2007 Lexus RX350 we are going to be installing the 4-pole harness part number 18002. The Lexus that we are going to show you today has a unique situation to it. On our website we indicate the wiring for the Lexus is going to be the modulite part number 119176. This particular Lexus does have a factory installed tow package that we are going to be able to tap into so we are going to show you how to locate that. The port is located in the rear cargo area of the vehicle underneath the flooring over on the driver side. We are going to need to remove most of this interior section. There is a particular order of operations that we need to abide by to get all of the components out. 00:38 more
5/14/2010 12:26:40 AM
Filter Videos
Filter Videos
